Hill Country Yard Sign
Welcome Home. This modern steel yard sign adds instant curb appeal to your home and features both address numbers and street name.
This address plaque is made to order in Austin, TX and is constructed of 11 gauge steel (approx. 1/8" thick) with a hand-finished and sealed rust patina OR a powder coated finish (black or brown). This plaque features (2) metal stakes (in the same finish as the sign) that easily slide in to two holes located on the back of the sign.
Choose from two available fonts: New York or Palm Springs
Overall: 11"H x length varies based on address, will not exceed 30"L
Street Numbers: 6"H
Street Name: 3"H
Stake Length: 21"H (5" goes into the back of the sign and you'll need about 8" into the ground for stability)
Installation Method (VERY important, please read):
1) Slide both stakes into the designated holes located on the back of the plaque
2) Using both hands, push stakes and plaque into the ground as much as possible (It may help to get the soil wet before you install). This will ensure that you are hammering the stakes in at the correct distance apart from each other.
3) Take the plaque off the stakes BEFORE you begin hammering the stakes into the ground with a rubber mallet. This is VERY important because pounding the top of the stakes with the plaque installed can damage the plaque and the finish.
4) Once you have hammered the stakes to your desired height, slide the plaque down on the stakes.
5) Welcome Home!